Skip to content
CremaLoop CremaLoop

Install on your grinder

These are the steps to mount an electric CremaLoop slow feeder (Metal, Ultra, Pro V2). For model-specific detail, see your model’s manual: Metal or Ultra.

Top to bottom: the glass container on the slow feeder, the grinder-specific adapter, and the grinder throat with the stock hopper removed. 1 Remove the stock hopper 4 Fill with beans max 50 g, about 2 cm free at the top 3 Seat the slow feeder level and secure 2 Fit the adapter the one for your grinder Grinder throat grinder switched off 2 cm
  1. Remove the stock hopper Take off the hopper or bean tray so the throat is clear
  2. Fit the adapter The adapter for your grinder on the throat
  3. Seat the slow feeder On the adapter, level and secure
  4. Fill with beans Max 50 g, about 2 cm free at the top
  5. Power on Check the LED shows the expected state

Grinder-specific notes

Section titled “Grinder-specific notes”
  • DF54 & DF64V - first remove the grinder’s anti-popcorn lid, then install the slow feeder in the grinder inlet.
  • Kafatek (MC, Flat, SDRM, MAX) - first remove the anti-popcorn lid, then install the slow feeder in the grinder inlet.

Next: First use.